Aspirators / Pooters – Glass

Used for collecting small insects, these aspirators/pooters are made in Australia.

Two types are available, both with glass collecting tube.

• E13G. The standard E13G with the E85T Trident vial
• E13GMc. The stronger glass E13GMc with the E999A McCartney vial

The same rubber bung is used on both aspirators, so both replacement tubes/vials are interchangeable with either aspirator/pooter.

E13G

The standard E 13G style consists of a Trident vial 72mm x 27.5mm OD diameter (ID diameter 20.5mm) glass tube fitted with a rubber bung containing aluminium intake (inside diameter approx.4.5mm) & suction tubing.

Clear plastic tubing (6mm) slides over both the intake & suction sides.

E13GMc

The stronger glass E13GMc style consists of a McCartney vial, 72mm x 27.5mm OD diameter (ID diameter 19.5mm), fitted with a rubber bung containing aluminium intake (inside diameter approx.4.5mm) & suction tubing. Clear plastic tubing (6mm) slides over both the intake & suction sides.

Replacement vials – E13GMcT and E13GT

Both come with screw style caps.

The replacement tube for the E13GT is the E13GT listed below.

The replacement tube for the E13Mc is the E13GMcT listed below.