Insect & Aquatic Net Handles – Aluminium Construction

These Australian made net handles are constructed from aluminium tubing. They are lightweight and strong. The handles are clear anodised which eliminates the soiling of hands from the aluminium. The top section of the handles have been structured so that the hoops slide tightly inside the tubing. They are held firmly in place by means of a bolt and two wing nuts.

Optional extras include the extension poles which give added length to the handle. The extension poles (unless otherwise stipulated) fit either of the handles.

To obtain a complete net, one must choose:

1. insect/aquatic net handle
2. insect or aquatic hoop
3. and an insect or aquatic net bag

If required, extensions to the insect/aquatic net handles are available as an optional extra when additional length is needed. The extensions will only provide additional length to an existing handle (ie. hoops
will not attach to an extension). The extensions are one piece units – they are not collapsible.

Catalogue E560 aluminium extension is 1,100mm (overall length is 1,185mm) whereas E561 aluminium extension is 730mm (overall length being 810mm).

All of the hoops (both insect & aquatic) are compatible with the handles.

The diameter of the hoop dictates the diameter of the bag required, so if you want a 456mm (18″) bag, then be sure you get a 456mm (18″) hoop to match it.

For tips on how to put the Net Bag onto the Net Hoop, see the construction sequence in the image gallery of Insect Nets (Bags and Hoops) (Enlarged Images).

Larger size hoops & bags can be made if required.